Cleaning And Storage - JOCCA 1550 Manuel D'instructions

English EN
-Press SPEED button to select desired speed "Low" , "Medium" and
"High" .
-Press WIND button to select desired wind function "Normal",
"Nature" and "Sleep".
-Normal Mode: The fan will run according to the selected fan speed
(low, medium or high)
- Natural mode: The fan will operate according to a set program
imitating the wind, natural model alternating High, Medium, Low
and stop speeds.
- Sleep Mode: The ventilation will be weaker and quieter.
-Press Cooler and Ionizer button to activate these functions.
-To turn off COOLER and IONIZER functions, press COOLER and
IONIZER button again.
-Press SWING button if you desired to turn on this function. If you
want to turn off, press button again.
Timer function
- The appliance's operating time can be controlled.
- The air cooler is equipped with a timer that allows you to set its
length of operation from 1 hour to 7 hours.
-To program the operating time, press TIMER button and selected
the desired time.
-To turn off this function press TIMMER button until the light on
display is off.

CLEANING AND STORAGE

-Make sure that the appliance is disconnected from the power
supply before cleaning.
-Do not use abrasive detergents or products that could damage the
appliance. Simply clean the surface with a wet cloth.
-Do not immerse the appliance in water or any other liquid.
-Store the appliance in a safe and dry place.
Cleaning the textile air filter :
-Unscrew the screw and press the clips to take out the textile air
filter.
-Use a soft brush, neutral detergent running water to clean the
textile air filter. Let it dry before assembly again.
7