Emerson EDVR95E Manuel De L'utilisateur page 38

Recording from an external source
Video
DVD-R
DVD-R
DVD-RW DVD-RW
Before recording from an external source, see the instructions for the connection on page 37.
1. Turn the TV and the unit on, and be sure to select the input
of the TV to which the unit is connected.
2. When you want to record to a disc: Press:
Press OPEN/CLOSE A button to open the disc tray, then
place the disc to record properly.
This operation may take a while to be recognized.
When you want to record to a tape: Press:
Insert the tape with a safety tab into the cassette compart-
ment.
3. Select the input of the unit to which the external equipment
is connected. (L2 or L1)
•To use the input jacks on the back of this unit, select "L1" position by
pressing [0],[0],[1] on the remote control or the CH K / L buttons.
•To use the input jacks on the front of this unit, select "L2" position
by pressing [0],[0],[2] on the remote control or the CH K / L but-
tons.
4. Select a recording speed using REC SPEED button. Refer to
"Recording speed" on page 26 for DVD or page 94 for VCR.
XP
SEP SLP
DVD mode
5. Press REC/OTR button on the unit to start recording.
6. Press PLAY button on the external source to record from.
7. For disc:
Press STOP C button on the unit to stop recording.
This operation may take a while to be completed.
For tape:
Press STOP/EJECT C A button on the unit to stop record-
ing.
38
Recording
Settings for an external source (cont'd)
VR
DVD-RW DVD-RW VCR VCR
SP LP
EP
DVD
VCR
SP SLP
VCR mode
4
OPEN/CLOSE
POWER
REC SPEED AUDIO
1
.@/:
ABC DEF
1 2 3
CH
GHI JKL MNO
4 5 6
PQRS TUV WXYZ VIDEO/TV
7 8 9
SPACE SLOW
0
DISPLAY VCR DVD PAUSE
PLAY
STOP
REC/OTR SETUP TIMER PROG.
5
ENTER
REC MONITOR
MENU/LIST TOP MENU RETURN
CLEAR/C-RESET ZOOM SKIP SKIP
SEARCH
CM SKIP
MODE
2
3
6
7