MCZ MAESTRO Manuel D'installation Et D'utilisation page 58

4-OPERATION 4-OPERATION
PELLET RECIPE
This enables you to edit the pellet recipe settings. To access this function, you must enter password 1234.
This function is used to adapt the stove to the type of pellet in use. Since there are many types of pellets available on the market, operation
of the stove can vary according to the quality of the fuel.
The amount of pellets in the brazier can be increased or reduced:
• If the pellets tend to jam in the brazier due to an excess of fuel
• If the flame is increasingly higher even at low power values
• If the flame is always low
The available values are from -3 to +3.
The adaptive mode is available in this function. By activating the function (select ON), the stove adapts its operation in case of special
installations or when using poor quality pellets.
1. Press key 1 ( ) to access the settings menu
2.
Press key 4 (+) / 5 (-) to select the PELLET RECIPE function
3. Press key 6 ( ) to confirm the PELLET RECIPE function
4.
Press key 4 (+) / 5 (-) to enter the first digit of the password
5.
Press key 9 ( )/10 (
6. Press key 4 (+) / 5 (-) to enter the second digit of the password
7.
Repeat the above operation for the missing digits.
8. Press key 6 ( ) to confirm
To edit the PELLET recipe, select one of the values available using keys 4 (+) / 5 (-).
The available values are:
- 3 = Reduction of pellet loading by 20% at all power values
- 2 = Reduction of pellet loading by 14% at all power values
- 1 = Reduction of pellet loading by 7% at all power values
0 = no change
1 = Increase of pellet loading by 3% at all power values
2 = Increase of pellet loading by 6% at all power values
3 = Increase of pellet loading by 10% at all power values
Attention! All the adjustments must be performed solely by authorised and qualified personnel. Errors
or incorrect settings may cause hazardous situations and/or incorrect product operation. Any liability for
improper use of the product is entirely borne by the user and relieves the Manufacturer from any civil and
criminal liability.
SUMMER/WINTER
This enables or disables the operating season (summer / winter).
1.
Press key 1 ( ) to access the settings menu
2.
Press key 4 (+) / 5 (-) to select the SUMMER/WINTER function
3. Press key 6 ( ) to confirm the SUMMER/WINTER function
4.
Press key 4 (+) / 5 (-) and scroll to select the function
5. Press key 6 ( ) to confirm
PELLET SENSOR
This enables or disables the pellet sensor. The pellet sensor is used to measure the level of pellets in the tank and thereby warn the user
that the pellets are running out. It is not installed on all stoves and is purchased as an optional accessory.
1.
Press key 1 ( ) to access the settings menu
2. Press key 4 (+) / 5 (-) to select the PELLET SENSOR function
3.
Press key 6 ( ) to confirm the PELLET SENSOR function
4.
Press key 4 (+) / 5 (-) and scroll to select the function
5. Press key 6 ( ) to confirm
58 58 58
) to select the next field
EN EN