MCZ MAESTRO Manuel D'installation Et D'utilisation page 56

4-OPERATION 4-OPERATION
1.
Press key 1 ( ) to access the settings menu
2.
Press key 4(+) / 5 (-) to select the TIMER T1-T2-T3 function
3. Press key 6 ( ) to confirm the TIME function
4.
Press key 4 (+) / 5 (-) to adjust the temperature of T1
5. Press key 9 ( )/10 (
6.
Press key 4 (+) / 5 (-) to adjust the temperature of T2
7. Press key 9 ( )/10 (
8. Press key 4 (+) / 5 (-) to adjust the temperature of T3
9.
Press key 6 ( ) to confirm
DAYS TIMER
This enables you to program the three temperature levels set throughout the week.
1. Press key 1 ( ) to access the settings menu
2. Press key 4 (+) / 5 (-) to select the DAYS TIMER function
3.
Press key 6 ( ) to confirm the DAYS TIMER function
4. Press key 4 (+) / 5 (-) to select the desired day
5.
Press key 6 ( ) to confirm
6. Press key 4 (+) / 5 (-) to select the desired temperature from among those set (T1/T2/T3/OFF) for the first time band available
(00.00/00.30). Press key 9(
desired temperature level. Proceed in the same way for all time bands of the day. If you want to edit one or more time bands set,
press keys 9 ( )/10 (
completed, press key 6 (
7. Once the first day is set (as shown in point 6), hold down the OK key for 5 sec. (it will buzz when copying is complete) and an asterisk
will appear (see image)
8.
With keys 4 (+) / 5 (-) go to the days where you wish to replicate the time set on Sunday
9. Press key 6 ( ) ok to confirm
10. Once the desired days of the week have been set, press key 1 (ESC) twice to exit
11. Enable the TIMER function by pressing key 6(
56 56 56
) to select the next temperature range
) to select the next temperature range
) to go to the next time band and repeat the operation by pressing keys 4 (+) / 5 (-) to select the
) and once the desired time band has been reached, press keys 4/5 to set a different temperature. Once
to confirm.
) for 3/4 seconds
DAYS TIMER SCREEN
EN EN