Use; Operating Mode Selector; Useful Information - poolstar Poolex Q-Line 7 Manuel D'installation Et D'utilisation

4.2

Operating mode selector

Before starting, ensure that the filtration pump is working and that water is circulating through
the heat pump.
To choose the operating mode, press the

Useful information

WARNING: When the cooling mode switches to heating mode or vice-versa, the heat pump will restart
after 10 minutes.
When the incoming water temperature is less than or equal to the required temperature (setpoint tempera-
ture - 1°C), the heat pump will switch to heating mode. The compressor will stop when the temperature of
the incoming water is greater than or equal to the required temperature (setpoint temperature + 1°C).

4. Use

M
button for 3s
Heating Mode (inverter)
Select the heating mode for the heat pump to heat the water in your pool intelligent-
ly.
Cooling Mode (inverter)
Select the cooling mode for the heat pump to cool the water in your pool intelligent-
ly.
ECO Silence Mode
Select the silence heating mode for the heat pump to heat the water at reduced
speed.
defrosting mode
Defrost mode is automatic and is activated when the evaporator has reached a
negative temperature.
19