Grohe 29 358 Mode D'emploi page 4

971973.book : i97197us.fm Seite 1 Freitag, Mai 28, 1999 1:05 PM
29 358 + 29 359 (1/2")
29 267 + 29 268 (3/4")
1
English
Specification
Specifications
•
Max. operating pressure
• Test pressure
• Flow delivery see fig. [1].
• Temperature
- max. (hot water inlet)
Installation
See dimensional drawings fold-out page I.
Caution:
[1]
If the valve is not installed with the direction of flow
as indicated on the body, it will not function properly,
see fig. [2].
Stop valves with ceramic headparts are not suitable
for installation as isolating valves (stop cocks).
Flush pipes thoroughly.
Check connections for leakage.
Mount trim set
For installation proceed as shown on fold-out
page III, figs. [3] to [6].
Only original Grohe replacement parts may be used.
[2]
145 psi
232 psi
176 °F