Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8 Operation
8.1 Streaming video
After connecting the HDMI transmitter and HDMI receiver you can stream video.
1. To switch on, move the switch On/Off to On.
The power indicator light lights up.
à
2. Start the video on the media box.
3. After use, move the switch On/Off to Off to switch off.
8.2 Controlling by IR remote control
After setting up the IR transmitter and receiver, control the media box with a compatible IR remote control.
■
If you are near the HDMI transmitter: point the remote control of the media box at the media box to
control it.
■
If you are near the HDMI receiver: point the remote control at the IR receiver connected to the HDMI
receiver to control the media box.
8.3 Controlling by ASCII commands
Connect a PC to the HDMI transmitter and control the transmitter with ASCII commands.
1. Download the ASCII commands reference from www.conrad.com/downloads.
2. Connect the PC to the port SERVICE on the HDMI transmitter with a micro USB data cable.
3. Open a serial command tool on the PC and control the HDMI transmitter by sending ASCII commands
from the ASCII commands reference.
9 Cleaning and care
NOTICE! Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
1. Disconnect the product from the power supply.
2. Clean the product with a dry, fibre-free cloth.
10 Technical data
10.1 Video and Audio support
Video resolution .................................... max. 4K2K@50/60Hz 4:4:4 as specified in HDMI 2.0b
Video bandwidth ................................... 18 Gbps
HDMI Signal transmission distance ...... Video resolution 4K2K@60Hz: 35 m (with CAT6/6a/7 cable)
Colour depth ......................................... 8-bit,10-bit,12-bit(1080p@60Hz)
Colour space ........................................ RGB, YCbCr 4:4:4 / 4:2:2. YUV 4:2:0
HDCP ................................................... HDCP 2.2, HDCP 1.x
HDR ...................................................... HDR10, HDR10+, HLG, Dolby vision
HDMI audio format ............................... LPCM 2.0/2.1/5.1/6.1/7.1,
Coaxial audio format ............................. PCM 2.0, Dolby Digital / Plus, DTS 2.0/5.1
Analog audio format ............................. PCM 2.0CH
10.2 Transmitter
Power supply ........................................ 12 V/DC, 2.5 A, max. 14 W
Dimensions (W x H x D) (approx.) ........ 210 x 25 x 100 mm
Weight (approx.) ................................... 617 g
10.3 Receiver
Power supply ........................................ 12 V/DC, 2.5 A, max. 14 W
Dimensions (W x H x D) (approx.) ........ 88 x 18 x 61 mm
Weight (approx.) ................................... 155 g
10.4 Power adaptor
Input ..................................................... 100 – 240 V/DC, 50/60 Hz, 0.8 A
Output ................................................... 12.0 V/DC, 2.5 A, 30 W
10.5 Environment
Operating temperature ......................... 0 to +40 °C
Operating humidity ............................... 20 – 90 % RH (non-condensing)
Storage temperature ............................. -20 to +60 °C
Storage humidity ................................... 20 – 90 % RH (non-condensing)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2369286_V3_1221_jh_mh_en I4/O3
6
Video resolution 4K2K@30Hz: 50 m (with CAT6/6a/7 cable)
Video resolution 1080P@60Hz: 60 m (with CAT6/6a/7 cable)
8-bit (4K2K@60Hz YUV4:4:4)
8-bit,10-bit,12-bit(4K2K@60Hz YCbCr 4:2:2/4:2:0)
Dolby Digital, Dolby TrueHD, Dolby Digital Plus(DD+),
DTS-ES, DTS HD Master, DTS HD-HRA, DTS-X
Publicité
Table des Matières
