Speaka Professional SP-HDS-700 Mode D'emploi page 5

No Part
B1 HDMI port HDMI OUT
B2 Power indicator
B3 Transmitter connection port
B4 Data signal indicator
B5 Port SERVICE
B6 Infrared controller connector
IR IN
B7 Power supply socket
6.3 IR Cables
Blaster
C1
C2
C3
Receiver
C4
C5
C6
No Description
C1 IR Blaster signal
C2 Power
C3 NC
7 Setting up
7.1 Setup diagram
Media box/
DVD/Blu-ray player
UHDTV
IN LOOP OUT
AUDIO OUT HDMI
2.0 Speakers
CAT 6/6a/7
Amplifier
Receiver
UHDTV
5
Description/Function
Connect a TV or display.
Lights up when the HDMI receiver is powered on.
Connect the HDMI transmitter.
When connected to the HDMI transmitter:
Solid on: Indicates an HDMI signal with HDCP
Blinking: Indicates an HDMI signal without HDCP
No function
Connect the IR receiver cable for IR control.
Connect the power adaptor if it is not connected to the
HDMI transmitter.
No Description
C4 IR Signal
C5 Power
C6 Grounding
Transmitter
2 3 4
1
OUT
CAT OUTPUT IR
IR Blaster
CAT IN
IR Receiver
7.2 Setting up the HDMI transmitter
Before you can stream video, set up the HDMI transmitter.
Important:
The setup location must ensure proper heat dissipation.
P :
RECONDITIONS
a
All playback devices (media box, sound system) you intend to connect to the HDMI transmitter are
switched off.
1. On the HDMI transmitter, move the switch ON/OFF to OFF.
2. Connect a HDMI video source (example: media box) to the port HDMI IN.
3. Connect a sound system to the ports AUDIO OUT L/R and AUDIO OUT COAX. If needed, consult
the sound system documentation for details on audio connections.
Important: the L/R jack is a 3.5 mm TRS jack. Only connect compatible jack plugs.
4. (Optional) To playback video near the transmitter, connect an HDMI display or TV to the HDMI port
LOOP OUT.
5. Place the HDMI transmitter on a stable surface. NOTICE! Do not place on surfaces sensitive to
heat or scratching.
--OR—
Use the mounting brackets to mount the HDMI transmitter permanently.
7.3 Setting up the HDMI receivers
Before you can stream video, set up the HDMI receivers.
Important:
The setup location must ensure proper heat dissipation.
For every HDMI receiver you connect:
1. On the HDMI receiver, connect a twisted pair cable (CAT6/6a/7) to the port CAT IN.
2. Connect the other end of the cable to a free port CAT OUTPUT 1-4 on the HDMI transmitter.
3. On the HDMI receiver, connect an HDMI display or TV to the port HDMI OUT.
4. Place the HDMI receiver on a stable surface. NOTICE! Do not place on surfaces sensitive to heat
or scratching.
--OR—
Use the mounting brackets to mount the HDMI receiver permanently.
7.4 Setting up IR control
Infrared control (IR control) is useful when the HDMI transmitter and the HDMI receiver are physically sep-
arated by walls or other objects IR light is unable to penetrate.
For example, you set up the media box in the living room and want to watch a movie on the TV in the bed-
room. The IR setup allows you to use an IR remote control in the bedroom to control the media box in the
living room.
7.4.1 IR Setup diagram
RC: Remote control
R: Receiver
DC 12V
7.4.2 Connecting IR transmitter and receiver
To enable infrared control (IR), connect the IR sensors to the HDMI transmitter and the HDMI receiver.
1. Connect the IR receiver to the port IR IN on the HDMI receiver.
2. Connect the IR blaster to the port IR OUT on the HDMI transmitter.
3. Fix the IR blaster head (sensor) in front of the IR receiver on the media box. Keep a distance of about
3 cm between the IR blaster head and the IR receiver on the media box.
7.5 Setting the EDID mode
Set the EDID mode to align the HDMI transmitter video and audio settings with the HDMI source (ex-
ample: media box).
1. Switch the HDMI transmitter off.
2. Download the EDID reference from www.conrad.com/downloads.
3. On the HDMI transmitter, use the switches EDID to set the required EDID mode as shown in the EDID
reference.
7.6 Connecting the power supply
To power the HDMI transmitter/receiver set, connect the power supply either to the HDMI transmitter or
the HDMI receiver.
1. Connect the plug of the power adaptor cable to the power supply socket on the HDMI transmitter or
the HDMI receiver.
2. Tighten the nut to secure the plug.
R T
T: Transmitter
M: Media box
M