Warranty Coverage Periods - Camp Chef PG24SG-2 Instructions Et Avertissements Pour L'installateur

Masquer les pouces

Table des Matières

Les langues disponibles

auger is not there may be a sheared auger pin. You can

determine if the auger motor is turning by watching the

small white fan at the end of the auger motor under the

hopper. If the white fan is turning the auger motor is on.

If the white fan is turning and the auger is not you will

need to replace the auger pin.

If problem cannot be resolved please call customer service.

Digital Readout Displays SENSR

1. Turn the power off and unplug the grill.

2. Check to make sure the sensor inside of the grill is

connected properly to the electronic board under the

hopper.

3. Call customer service for a replacement sensor.

Digital Readout Displays PRERR

1. Press the Probe Temp button - Pressing the Probe Temp

button will toggle the digital readout between the actual

temperature inside of the grill and the temperature

measured using the meat thermometer.

2. Make sure the meat thermometer is connected properly to

the front of the grill. If the Probe Temp button is pressed

to display the Probe Temp without the meat thermometer

properly connected to the front of the grill it will display

PRERR.

3. Call customer service for a replacement meat

thermometer.

Digital Readout Displays "-----"

1. Rotate the dial from Shutdown to feed or any other cook

setting.

LIMITED WARRANTY

Camp Chef No-Hassle Warranty

Here at Camp Chef we stand by our products and take pride in our

customer service. Because of this, your new Camp Chef product comes

with a No-Hassle Warranty. What does that mean? It means that if we

did something wrong, we will make it right. We guarantee our products

to be free from defect in all materials and workmanship (excluding

paint and finish). We will replace defective parts so you can get back to

enjoying your product as soon as possible.

Required Maintenance:

Clean your product after each use to maintain its finish and prolong

its lifespan. Wipe away all grease and ashes. Keep metal products

free of moisture, salts, acids and harsh fluctuations in temperature.

Unfortunately, product paint and other finishes are not covered by this

warranty. The exterior finish of the product will wear down over time.

Coverage Details:

Warranty does not cover normal wear of parts or damage caused

by misuse, abuse, overheating and alteration. No alterations are

covered in this warranty. Camp Chef is not responsible for any loss

due to neglectful operation. Furthermore, this warranty does not cover

items purchased from a 3rd party company, unauthorized dealers, or

damages caused by natural disasters such as earthquakes, hurricanes,

tornadoes, floods, lightning, fires, etc.

Upon the expiration of this warranty, all such liability will terminate. No

other warranties are expressed or implied.

Please keep all original sales receipts from the authorized dealer.

Proof of purchase is required to obtain warranty services. Any parts

or products returned without written authorization will be discarded

without notice.

To obtain warranty services submit a warranty request at

http://www.campchef.com/warranty-information, email warranty@

campchef.com, or call 1.800.650.2433. Mon-Fri 7 AM-5 PM MST

Our English speaking Product Specialists are happy to help.

Warranty applies to the contiguous U.S. states only.