Power Amplifier - Peavey CS 800x4 Manuel De L'utilisateur

Rated Power 4 ohms bridged
Rated Power 4 x 2 ohms
Rated Power 4 x 4 ohms
Rated Power 4 x 8 ohms
Rated Power 1 x 2 ohms
Rated Power 1 x 4 ohms
Rated Power 1 x 8 ohms
Minimum Load Impedance
Maximum RMS Voltage Swing
Frequency Response
Power Bandwidth
T.H.D. 4 x 2 ohms
T.H.D. 4 x 4 ohms
T.H.D. 4 x 8 ohms
SMPTE IMD
Slew Rate
Damping Factor (8 ohms)
Input CMRR
Voltage Gain
Input Sensitivity
Input Impedance
Hum and Noise
All manuals and user guides at all-guides.com
CS 800
®

Power Amplifier

SPECIFICATIONS
CS 800x4
825 watts @ 1 kHz <0.025% THD
400 watts per channel @ 1 kHz <0.025% THD four channels driven
300 watts per channel @ 1 kHz <0.02% THD four channels driven
180 watts per channel @ 1 kHz <0.02% THD four channels driven
500 watts @ 1 kHz at <0.02% THD
350 watts @ 1 kHz at <0.015% THD
200 watts @ 1 kHz at <0.006% THD
2 ohms
45 volts
10 Hz - 20 kHz; +0, -1 dB at 1 watt
10 Hz - 50 kHz; +0, -3 dB at rated 2 ohms power
<0.20% @ 325 W per channel from 20 Hz to 20 kHz
<0.10% @ 250 W per channel from 20 Hz to 20 kHz
<0.10% @ 160 W per channel from 20 Hz to 20 kHz
<0.1% 60 Hz and 7 kHz, 250 W @ 4 ohms
7 V/us
> 400:1 @ 20 Hz - 400 Hz
> -93 dB @ 1 kHz
x 40 (32 dB)
0.720 V @ 2 ohms, 0.865 V @ 4 ohms, 0.940 V @ 8 ohms
15k ohms, balanced
> -108 dB, "A" weighted referenced to rated 4 ohms power
16
4
x