Adjusting Speaker Volume; Using Headphones - Logitech z333 Manuel Du Produit

Logitech Multimedia Speaker System z333
Features
1
-
2

1. ADJUSTING SPEAKER VOLUME

Adjust your Multimedia Speaker System z333 volume with the wheel located on the middle
of the wired remote. (VOLUME UP - turn the wheel to the right. VOLUME DOWN - turn the
wheel to the left)

2. USING HEADPHONES

Most types of analog headphones with a 3.5mm connector can be plugged into the headphone
jack on the right end side of the wired remote. When you plug in the headphones, the speaker
is muted automatically. With headphones plugged into your Multimedia Speaker System z333,
the main control volume is through your audio device (computer, tablet or smartphone, etc).
Headphone volume will not be affected by volume adjustment on the wired remote.
3. ADJUSTING BASS VOLUME
To adjust the bass level of your Multimedia Speaker System z333, turn the bass control
located at the back of your subwoofer clockwise.
4. CONNECT TO TWO DEVICES SIMULTANEOUSLY
Connect to two devices at the same (TV and computer for example) through the RCA
connector on the back of the subwoofer and the 3.5mm cable on the subwoofer.
6 English
+
3
4
BASS