Samsung BD-E6500 Mode D'emploi page 22

Settings
Audio
dynamic Range Control
Network
22
|
English
All manuals and user guides at all-guides.com
Lets you select the digital audio output format that is
digital Output
suitable for your TV or AV Receiver. For more details,
see the digital output selection table on page 53.
Lets you choose to have 96Khz PCM signals
downsampled to 48Khz before they are outputted to an
pCM downsampling
amplifier. Choose On if your amplifier or receiver is not
compatible with a 96Khz signal.
Lets you apply dynamic range control to Dolby Digital,
Dolby Digital Plus, and Dolby True HD audio.
 Auto : Automatically controls the dynamic range of
 Off : Leaves the dynamic range uncompressed,
 On : Turns dynamic range control on for all three
Lets you select the multi-channel downmix method that
is compatible with your stereo system. You can choose
downmixing Mode
to have the player downmix to normal stereo or to
surround compatible stereo.
You can enjoy multichannel sound via HDMI output from
dTS Neo:6 Mode
a 2 channel audio source.
Configure the network connection so you can enjoy
Network Settings
various features such as Internet services or AllShare
Wi-Fi functionality, and perform software upgrades.
Network Status
Lets you check the current network and Internet status.
Lets you connect a Wi-Fi Direct device to the player
using a peer-to-pear network, without the need for a
wireless router. You can use the device to control the
player. Note that if you set the Quick Start option to On
Wi-Fi direct
(See page 23), that Wi-Fi devices connected to your
player through WI-Fi Direct and Soft AP (See page 23)
will maintain their Wi-Fi connections even when the
player is off.
Dolby TrueHD audio, based on information in the
Dolby TrueHD soundtrack. Also turns dynamic range
control on for Dolby Digital and Dolby Digital Plus.
letting you hear the original sound.
Dolby formats. Quieter sounds are made louder and
the volume of loud sounds is reduced.