YORKVILLE Traynor YS1084 Mode D'emploi page 13

Cabinet Program Power (Watts):
Cabinet Impedance (ohms):
Power @ min. impedance (Watts):
Minimum Impedance (ohms):
Burst Power - 2 cycle:
Speaker Configuration - LF (Size / Power):
Speaker Configuration - HF (Size / Power):
Frequency Response (Hz +/-3dB):
Hum and Noise (dB):
Input Channels:
Channel 1 - inputs:
Channel 1 - controls:
Channel 2 - inputs:
Channel 2 - controls:
Channel 2 - switches:
Channel 3 - inputs:
Channel 3 - controls:
Channel 4 - inputs:
Channel 4 - controls:
Channel 5 - inputs:
Master Volume Control:
Main Tone Controls:
Input Sensitivity (mV):
Master Outputs:
Line Out (type / configuration):
Line Out Sensitivity (Vrms):
Effects Volume:
Effects Loop / Location:
Effects Footswitch / Function:
Effects Return Sensitivity (Vrms):
Internal Reverb / Effects:
LED Indicators:
External speaker output / location:
Headphone Jack:
Dimensions (DWH, inches):
Dimensions (DWH, cm):
Weight (lbs / kg):
Specifications
Model:
Acoustic Master Custom
Type:
Acoustic Combo Amplifier
225
4
225
4
250
150 watt, 2-inch voice coil, 8-inch woofer
2 X 1-inch Neo Dome Tweeter
50- 20 kHz
-98
4 + Aux
1
gain, 4 band tone control, Notch, D-EFX (ch1/2)
1
gain, 4 band tone control, Notch
EFX enable/disable
1
gain, 4 band tone control, Notch, D-EFX
1
gain, monitor channel post Master Volume
RCA pre master volume
yes
no, independent
Graphic EQ:
no
ch1/100, ch2/100, ch3/100, ch4/100
no
1/4-inch jack post EFX / XLR Pre EFX
1
wet and dry control
inserts on ch1-3
ch1/2 and ch3
0.5
DSP
Power, clip
Protection:
EFX input limiter, Clip limiter
no
no
12.5 x 20 x 13
50.8 x 32 x 33
35 / 15.9
11