NGS sixinone Mode D'emploi page 20

Replacings
REPLACING THE CUTTER UNIT
n order to replace a worn or damaged cutter unit, please contact
customer support of NGS Home (+34) 902 11 46 86.
REPLACING THE MICROSHAVER BLADE
If the metal is damaged, do not continue using it; replace it for
another original blade authorized by the NGS Home service.
• Extract the removable shaving header (fig 26).
• Separate the removable header shaver blade (fig 27).
• Place the new blade in the removable header (fig 28).
• After placing the blade in the header, push it into its position with
your finger (fig 29).
All manuals and user guides at all-guides.com
REPLACING THE MICROSHAVER CUTTER
If the microshaver is damaged replace it and the blade immediately
for original parts authorized by the NGS Home service.
• Extract the removable shaving header (fig 26). Remove the old
• Make sure you do not loose the spring of the movement unit.
• Insert a new microshaver cutter in the movement unit (fig. 31).
• When the microshaver cutter is in the correct position, push it
• Place the removable shaver header on the device.
cutter of the microshaver by pulling from it (Fig. 30).
with your fingers to the end.