NGS sixinone Mode D'emploi page 10

Battery charge
and discharge instructions
Follow these steps to recharge the battery:
1 Ensure the hair cutter is switched off.
2 Place the device in the charger base.
3 Proceed to charging by inserting the cable directly in the hair
cutter (fig. 2).
Use 230 V.
Use only the original cable.
4 After a few minutes, the green indicator (located on the charger)
will light up indicating the start of charge process (fig. 3).
The complete battery recharge lasts approximately 10 hours,
and provides autonomy of the hair cutter of 35 minutes.
5 Disconnect the cable from the wall, after completing the
recharge.
All manuals and user guides at all-guides.com
In order to optimize battery life, follow these usage
conditions:
• The hair cutter must be fully charged before using it the first
• Battery performance improves if you normally wait to recharge
• Charging at temperatures under 0º or greater than 40º
• Do not leave the hair cutter charging for more than 24 hours.
• Do not leave the cable permanently plugged in.
• Fully discharge the battery at least twice a year.
time, or after a long period of time without using it.
the battery when it is almost empty. Continuous charging of the
battery reduces the useful life of the device.
negatively affect battery life.