NGS sixinone Mode D'emploi page 17

HAIR CUTTING WITH THE CUTTER GUIDE (Accessory E; Infour)
1 Place the Cutter guide (Accessory E; Infour) in the main header
(accessories C and B; Inone) as indicated in figure 17.
2 Press the button carefully to slide the comb into the desired
position.
The main header (accessory C and B) does not allow selecting
cutter length, performs a total shaving of hair.
If this is the first time you use the device we recommend
selecting the cutter guide that provides the longest length, to
adjust the length while you familiarize yourself with the device
See lengths table (table 2).
3 Ensure the smooth side of the comb is in constant contact with
the head to obtain better results (figure 19 – 20).
All manuals and user guides at all-guides.com
4 In order to obtain efficient hear cut results, the device must
5 Stop cutting periodically, comb the hair and check the results
6 Repeat the process with the hair cutter to ensure that all hair
7 Periodically shake the device or blow to remove hair from the
8 Switch off the device (off position) and remove hair
9 Clean the unit after each use.
be used in the direction contrary to hair growth starting from
the back of the neck and sides and moving to the top of the
head. Then cut from the forehead to the crown, move the device
smoothly around the crown in different directions (figure 21).
obtained so far.
has been cut.
upper part.
accumulation.
EN
FR
ES
DE
IT
P