Preliminary Recommendations - NGS sixinone Mode D'emploi

Eyebrow Hair Cutter
Eyebrow Hair Cutter
1 Place the nose, ear and eyebrow hair cutter (Accessory O;
Infive) following header change instructions. You will hear a
"click" when the header is correct fitted (see figure 11).
2 Switch on the device and use the header end to cut hairs
individually.
3 Place the cutter against the root of the hair and move it along
the edge of the eyebrows, from the space between eyebrows to
the end, in the direction of the hair.
WARNING: Do not use the cutter to define or cut the
eyebrow completely. Be careful of not cutting eyelashes or
damaging eyes.
4 Switch off the hair cutter. Clean accessories after each use.
All manuals and user guides at all-guides.com
Hair Cutting

Preliminary recommendations

• Verify that the battery of the device is fully charged before
starting to cut hair.
• Ensure that the head of the person whose hair will be cut
is at your chest height so that all parts are visible
• Only use the device on dry hair, never on wet or damp
hair.
• Before starting, comb the hair in the direction of growth