Chapter 3 - OCP 42/OCP 50 Maintenance
Access to the various units
WARNING
ALL COMPONENTS MUST BE REPLACED BY THOMSON BROADCAST
SYSTEMS ORIGINAL COMPONENTS
3.1 - ACCESS TO THE VARIOUS UNITS
3.1.1 - Removing the cover
• Loosen the 6 cover attaching screws and the monocontrol mechanism attaching screw.
• Remove the cover.
Pay attention to the connector J12 on the MPU BOARD connected to the DC IN
(XLR4) connector coupled to the cover.
Ring
Groove
B1500M24LA
September 2000
Control knob with its bottom ring
Control knob without bottom ring
Bottom part
Screw
THOMSON OCP 42/OCP 50
User manual
185