Check You Have Received; Exploded View - Rutland FM910-4 Manuel Du Propriétaire

Rutland Furlmatic 910-4 Windcharger
Check You Have Received - See FM910-4 Exploded View
1 x Main generator assembly
1 x Tail Fin
6 x aerofoil blades
24 x No. 0x25mm special self-
tapping screws
In the event of loss or damage, consult your dealer or the manufacturer.
Exploded View of Rutland FM910-4
6 Blades with
24 Screws
Nose Cone
with 3 nylon
Screws
Tools That You Will Need:
Suitable wire stripper
Small terminal screwdriver
Large flat blade screwdriver
Crosshead screwdriver
10mm and 17mm Spanner
Other Items You May Have Selected from Marlec:
A Rutland Charge Regulator - visit www.marlec.co.uk for current models
Land Tower and Rigging Kit
Cable (usually 2.5mm² twin core - Part No: 902-015
Doc No: SM-138 Iss. D 16.03.15
Generator
Hub
(Part Nos. CA-12/08 & CA-12/07)
2 x M10 hex head screws
2 x Tab washers
1 x 2-way terminal block
Nacelle Dome
Other Items You Will Need:
Tower/Mounting pole
Batteries
Battery terminals
Cable
Connector blocks (as determined
by your total system)
)
6
Installation & Operation
Tail fin fixes
with 2 nuts
and bolts
Post Adaptor fixes
with 2 bolts and
tab washers
Marlec Eng Co Ltd