Check You Have Received; Exploded View Of Rutland 504 "E-Furl; Other Items - Rutland 504 E-Furl Manuel Du Propriétaire

Rutland 504 "e-Furl" Windcharger
Check You Have Received - See Rutland 504 "E-Furl" Exploded View
1 x in line fuse holder and fuse
•
1 x safety turbine with main generator assembly
•
1 x nose cone + 3 x snap rivets
•
1 x tail fin assembly + 2 x M6 hex head screws
•
1 x 5 mm Allen key
•
1 x 2-way terminal block
•
2 x M8 x 16 button cap screws
•
2 x shakeproof washers
•
Safety Turbine - The
blades incorporating
the outer ring must
not be tampered with
or altered.
Nose Cone with
3 x snap rivets

Other Items

What You Will Need -Tools
Suitable wire stripper
•
Small terminal screwdriver
•
Large flat blade screwdriver
•
Crosshead screwdriver
•
10 mm spanner or socket
•
Other Items You May Have Selected
A Rutland Charge Regulator from our range
•
Cable (usually 2.5mm² twin core - Part No 902-015)
•
Rutland 503/504 Marine Mounting Kit and Stays Kit ( CA-12/01 & CA-12/32 )
•
Rutland 503/504 Land Tower Kit & Rigging Kit ( CA-12/12 & CA-12/13 )
•
Short section of stainless steel tube to adapt into your own mounting design
•
Voltmeter & Ammeter
•
Doc. No: SM-151 Issue A 07/01/2011

Exploded View of Rutland 504 "E-Furl"

Windshaft Assembly
6
Nacelle containing
Post Adaptor Assembly -
Other Items You Will Need
Mounting pole and stays
•
Cable
•
Batteries
•
Battery Terminals
•
Connector Blocks (as determined by
•
your total system)
Installation and Operation
Tail Fin Assembly
with 2 x M6 x 12
Hex. Head screws,
spring washers and
plain washers.
This fits into a pole of
31.7mm internal
diameter and NO
MORE THAN 38.1mm
external diameter.
Marlec Engineering Co Ltd