Functional Description - ITC SPT110 Manuel De L'utilisateur

SAFETY PRECAUTIONS FOR DRILL
WARNING! If the drill stops suddenly, release the trigger switch immediately
and remove the drill from the work to determine the cause.
WARNING! The warnings, cautions, and instructions detailed in this manual
cannot cover all possible conditions and situations that occur. It must be
understood by the operator that COMMON SENSE AND CAUTION ARE
FACTORS that cannot be built into this product, but MUST BE SUPPLIED BY
THE OPERATOR.
SPECIFICATIONS
Product number 011211
Model Number SPT110
Input voltage 120V~60Hz
Input power 4.2 amps
No-load speed 0 - 3000 rpm
Chuck capacity 10 mm (3/8")
Power cord 1.8 m (6 ft.)
Tool weight 1.45 kg (3.19 lb.)

FUNCTIONAL DESCRIPTION

4
011211
!
!
A 10 mm (3/8") 3-jaw chuck
B Chuck tightening ring
C Chuck stop ring
D Belt hook
E Trigger lock-on button
F Power cord
G Variable speed trigger
H Forward / reverse switch
It features:
Double insulated design
„
10 mm ( 3/8") keyless chuck
„
Convenient above-the-trigger
„
reverse switch
Lock-on button
„
Padded hand grip
„