Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT SAFETY INSTRUCTIONS
WARNING! ELECTRICAL SHOCK. When using electric tools, machines or
equipment, basic safety precautions should always be followed to reduce the
risk of fire, electric shock, and personal injury.
WARNING! Read and understand all instructions. Failure to follow all
instructions listed below may result in electric shock, fire and/or serious
personal injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1.
Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2.
Do not operate power tools in explosive atmospheres such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
3.
Keep bystanders, children, and visitors away while operating a power tool.
Distraction can cause you to lose control.
ELECTRICAL SAFETY
1.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is
grounded.
2.
Don't expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
3.
Do not abuse the cord. Never use the cord to carry the tools or pull the plug
from an outlet. Keep the cord away from heat, oil, sharp edges or moving
parts. Replace the damaged cords immediately if you found one. The
damaged cords will increase the risk of electric shock.
4.
When operating a power tool outside, use outdoor extension cords marked
"W-A" or "W". These cords are rated for outdoor use and so can reduce the
risk of electric shock.
5.
Ensure the extension cord you use is of sufficient gauge for its length.
Recommended Minimum Wire Gauge for Extension Cords
Amps
7.62 m
from Tool
(25')
Nameplate
long
0 - 5 amps
16 ga.
5.1 - 8 amps
16 ga.
8.1 - 12 amps 14 ga.
12.1 - 15
12 ga.
amps
15.1 - 20
10 ga.
amps
PERSONAL SAFETY
1.
Stay alert, watch what you are doing and use common sense when operating
a power tool. Do not use the tool while tired or under the influence of drugs,
alcohol or medication. A moment of inattention while operating power tools
may result in serious personal injury.
2.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep
your hair, clothing and gloves away from the moving parts because loose
clothes, jewelry and long hair can be caught in the moving parts.
3.
Avoid accidental starting. Be sure switch is off before plugging in .Carrying
tools with your finger on the switch or plugging in tools that have the switch
on will invite accidents.
2
011211
15.24 m
22.86 m
30.48 m
(50')
(75')
(100')
long
long
long
16 ga.
16 ga.
14 ga.
16 ga.
14 ga.
12 ga.
14 ga.
12 ga.
10 ga.
12 ga.
10 ga.
10 ga.
10 ga.
10 ga.
Do Not
Use
45.72 m
60.96 m
(150')
(200')
long
long
12 ga.
12 ga.
10 ga.
Do Not
Use
Do Not
Do Not
Use
Use
Do Not
Do Not
Use
Use
Do Not
Do Not
Use
Use
!
!
Publicité
Table des Matières
