Cleaning Your Monitor; Removing The Base - Toshiba TekBright PA3552 Serie Manuel De L'utilisateur

Cleaning your monitor

Please follow the guidelines below when cleaning the monitor.
■
Always unplug the monitor before cleaning.
■
Use a soft cloth to wipe the screen and cabinet front and sides.
■
Never spray cleaner directly onto the monitor or use harsh chemical
products to clean it.

Removing the Base

To remove the base from the monitor, follow these steps:
1. Make sure the monitor display is adjusted to the standard upright position.
2. Carefully lay the monitor and stand on a flat surface with the monitor
screen facing upward.
3. Hold the monitor steady with one hand. Use the other hand to pull the
tab on the base upward and tilt the top edge of the base toward the
monitor until the latch is released (see the illustration below).
4. Remove the base.
The monitor is now ready to be placed in a shipping carton or other
protected location for transporting or storage.
• OSD Down/Up
• Information
Top edge
Tab
Moves the OSD control menu vertically on
the screen. When the "+" button is pressed,
the OSD control menu will move to the
upper edge of the screen. When the "-"
button is pressed, the OSD control menu
will move to the lower edge of the screen.
Indicates the current resolution, Vertical
Frequency.
User's Manual
15