Canvas 064-4017-6 Instructions De Montage page 42

OPERATING INSTRUCTIONS
Log Glow Mode: To lock the flame function in the OFF position, with the flames in
L4 mode, press and hold the flame button (5) for five seconds. The log lights flash
several times to indicate that the flame function is locked. In this mode, there are no
flames but only glowing logs. Pressing the flame button in sequence will set the logs
for different levels of log brightness. The log brightness levels are shown in the display
(1). The log settings are as follows:
Button Press Flame Level
1st press Flames Off
2nd press Flames Off
3rd press Flames Off
4th press Flames Off
5th press All Off
To unlock the flame function, press and hold the flame button (5) for five seconds.
The log lights flash several times and then both flame lights and log lights turn on.
1
USING THE MAIN POWER BUTTON
Press the power button (6) to turn the fireplace/heater unit on and off. Press the
power button (6) once to turn the unit on. Press again to turn the unit off.
42
ASHCROFT MEDIA FIREPLACE
All manuals and user guides at all-guides.com
Display Value Fireplace Appearance
L4 Logs Glow Brightest
L3 Logs Glow Medium
L2 Logs Glow Low
L1 Logs Glow Brightest
None Logs Off
5
6