Sunny Health & Fitness BELT DRIVE Mode D'emploi page 13

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-
907-8669).
#88
35
36
38
#6 M10*35*15*H6 2PCS
#11 M10*H9.5*S17 2PCS
#83 M5*10 1PC
9
91
S14
37
#89
S17
#88
83
2
6
8
9
11
10
38
91
85
STEP 5:
Loosen and remove the [seat slider] Adjustment
Knob (No. 38). Insert Seat Slider (No. 36) into
the Seat Post (No. 37). Adjust the Seat Slider
(No. 36) to the desired position, re-insert and
tighten Adjustment Knob (No. 38) to secure the
post in place.
Secure Seat (No. 35) to the Seat Slider (No. 36)
with Spanner (No. 88).
NOTE: Before you fully tighten the seat, you can
adjust the front of the seat higher or lower to meet
your needs.
STEP 6:
Loosen and remove the [handlebar] Adjustment
Knob (No. 38). Insert Handlebar Post (No. 10)
into the sleeve located on the front of the Main
Frame (No. 85). Adjust the Handlebar Post (No.
10) to the desired position and reinsert and
tighten the Adjustment Knob (No. 38) to secure
the post in place.
Secure Handlebar (B) (No. 8) to Handlebar Post
(No. 10) using 2 Bolts (No. 6) and 2 Nuts (No.
11). Tighten and secure with Spanner (No. 89).
Attach Tablet Bracket (No. 2) onto the
Handlebar (B) (No. 8) with Screw (No. 83).
Tighten and secure with Spanner (No. 88).
Attach the Computer (No. 9) to the bracket
located on the Handlebar Post (No. 10). Connect
the link wire of the Computer (No. 9) to the Trunk
Wire (No. 91).
The assembly is complete!
12