Setting Up Your Television; Installing Batteries In The Remote Control - Dynex DX-R20TV Guide De L'utilisateur

10
For compatibility with other universal remotes, use the codes listed for Emerson, Memorex,
Orion, Sansui, Sylvania, or Zenith.

Setting up your television

Connecting your television to AC power
Use the AC polarized cord provided for operation on AC. Insert the AC plug into a standard
120V 60Hz polarized AC outlet.
Notes:

Installing batteries in the remote control

Before using the remote control, you must install batteries. Use two AAA size batteries (not
supplied). The batteries may last about one year depending on how much the remote control
is used. For best performance, we recommend the batteries should be replaced on a yearly
basis, or when the remote operation becomes erratic. Do not mix old and new batteries or
different types.
Brand
RCA
One-For-All
Sony
Wider hole
and blade
- Never connect the AC plug to other than the specified voltage (120V 60 Hz). Use the
attached power cord only.
- If the polarized AC cord does not fit into a non-polarized AC outlet, do not file or cut the
blade. It is your responsibility to have an electrician replace the obsolete outlet.
- If you cause a static discharge when touching the television and the television fails to
work, unplug the television from the AC outlet, then plug it back in. The television should
work normally.
Setting up your television
Program code
135
0463
8042
AC outlet
Polarized AC plug (one blade is
wider than the other.)