OK. ORF 210 Mode D'emploi page 63

All manuals and user guides at all-guides.com
EN
Memory preset
20 radio stations can be preset to a program list
for each frequency band.
Manual preset
1. Select a radio mode. Set a station by tuning
according to chapter Tuning.
2. Press the MEM button to start the presetting
process. Display will show "1" flashing.
3. Press the M- or M+ button to select the desired
preset station number.
4. Press the MEM button again to saved the actual
station to the desired preset station number.
Automatic preset
Alternatively stations can also be saved
automatically. Push and hold MEM button for
approx. 4 seconds. Auto scanning will be started.
"M" and "preset station number" will flash during
the process. All received stations will be saved and
preset automatically.
Preset station
Once all stations are preset, press the button M-
or M+ button to select your desired stations.
Note: The preset station memory will be
deleted when removing the batteries (e.g. for
replacement).
IM_ORF 210_161209_V07_A_HR.indb 52
52
13/12/16 8:45 AM