Set Language; Device Description - sauermann VT 210 Guide Rapide

Quick start guide
English
Specially designed for the control of ventilation systems, the VT 210 allows users
to measure the air velocity, the airflow and the temperature in ducts.
Operating temperature, protection of the instruments and information about storage and the battery
•
Operating temperature: 0 to 50 °C (+32 to +122 °F)
• IP 54
• Storage temperature: -20 to 80 °C (-4 °F to 176 °F)
If the instrument is stored outside the operating temperature (for example in a van, a
warehouse,...) please wait for 10 minutes in its operating temperature before starting and using it.
Rechargeable Li-ion battery inside the instrument, 16 h battery-life with a pressure module or 14
h a hotwire probe. The instrument is supplied with a 5 V, 1 A power adapter to load the internal
battery. The current loading is indicated by a battery symbol on the top left of the screen. The
orange led on the bottom of the instrument is also on until the full loading of the battery (the led
turns green).
Directive 2014/53/EU
Hereby, Sauermann Industrie SAS declares that the radio equipment type AMI 310 is in compliance
with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the
following internet address: www.sauermanngroup.com
1

Device description

1 2
3
4 5
7
6
8
10
9
11 12
1. Battery level
2. Date and time
3. Home screen
4. Measurement menu
5. Dataset menu
6. Configuration menu
7. Information menu
8. Function keys
9. OK button
10. Navigation arrows
11. ESC button
12. On/Off button
2 Connections
1
2
1. Module
4 2. Location to remove the module
1
3
3. Battery
4. Probe handle
1. Mini-DIN C2 connection
1 2
2. Mini-DIN C1 connection
1. USB connection + power supply
2. Light indicator for battery charging
1
2
3

Set language

OK
4 Use of the probes
Connect a probe
Connect the mini-DIN cable on the mini-DIN connection of the probe.
Connect the mini-DIN cable with the probe on the instrument.
A beep indicates that the operation has been correctly performed.
Special precautions for air velocity probes
Press Up and Down
arrows to select the
OK
required language:
FRA, ENG
Before any use of the device
with an air velocity probe,
please lower the protective
tube (1) of the sensitive
element (except vane probe).
Always use the standard air
velocity probe with the red
point in front of the flow.
Always use the telescopic
probe with the white point in
front of the flow.