Applicable Model; Accessories - TOSHIBA TEC Corporation B-570-QP Serie Mode D'emploi

1. INTRODUCTION
1. INTRODUCTION
Thank you for choosing the TEC B-570 series thermal/transfer printer. This new generation high
performance/quality printer is equipped with the latest hardware including the newly developed high
density (12 dots/mm, 306 dots/inch) near edge print head. This will allow very clear print at a maximum
speed of 203.2 mm/sec. (8 inches/sec.). Other standard features include an automatic ribbon saver, a built-
in rewinder/strip mechanism and an internal media supply spool. Combine this with an optional high speed
P.C. interface board which allows vastly reduced graphic data transfer times and you have a printer to suit
a variety of applications and environments.
This manual contains general set-up and maintenance information and should be read carefully to help
gain maximum performance and life from your printer. For most queries please refer to this manual and
keep it safe for future reference.
This is a Class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
CAUTION:
To avoid injury, be careful not to catch or jam your fingers while opening or closing the cover.
CAUTION:
Do not touch moving parts. To reduce the risk that fingers, jewelry, clothing, etc., be drawn into the
moving parts, push the switch in the "OFF" position to stop movement.

1.1 Applicable Model

• B-572-QP
Model name description
B - 5 7 2 - Q P
2: Thermal direct/Thermal transfer

1.2 Accessories

Owner's Manual
(EM1-33031)
Rewinder guide plate
(FMBD0034501)
All manuals and user guides at all-guides.com
WARNING!
QP: European version
Power Cord
Fan Filter
(FMBB0036801)
E1-1
ENGLISH VERSION EM1-33031
Head Cleaner Unpacking Procedure
(24089500013)
Screw
(SM-4x6B)
1.1 Applicable Model