Hkoenig mxc36 Manuel D'instructions page 8

ON/OFF
Press the ON/OFF button. The indicator light will flash, the appliance will be in standby mode. If
you donot operate the appliance in one hour, The indicator of ON/OFF will go
out, and then power off, you should press the ON/OFF again to enter in standby mode.
Press the relevant button once, The indicator light in the selected will flash
Press the ON/OFF button, the relevant programme will start (except Stir), Meanwhile, the ON/OFF
button light turn red to green.
Press the ON/OFF button once more , the relevant programme will stop.
NOTE:
The appliance can only be blended on when mixing jug is closed with the lid.
DISPLAY
The appliance has a display on which you can read the remaining time of cooking and blending
program in minutes and seconds and the blending speed.
1.Time (minutes and seconds)
2.Heating symbol
3.Blending speed (setting 1 to 4 )
4.Blending symbol
JUICE (Preset Mixing)
It is perfect for making juice, press the JUICE button and then press the ON/OFF button to enter
this prigramme, the appliance will run at speed setting 4 and it will automatically stop after 50
seconds.
Cooking programs
100°C : Heating up to 100°C and cooking
80°C : Heating or keeping warm up to approx. 80°C
60° : Heating, keeping warm up to approx. 60°C
The durations of the cooking programs are preset :25 minutes each.
* You may individually adjust the times with the + and – buttons between 1 and 90 minutes.
* You may switch to another cooking setting during the cooking program. The previour duration of
the program will be kept.
* Press the ON/OFF button to enter progeamme.
After finish, you will hear 4 beeps.
STIR(Mixing at intervals)
As long as you keep this button pressed down.
You can stir Ingredients during the cooking programme.
BLEND (Mixing program )
The blending speed can be changed, press the with + or – buttons.
Setting 1 = low speed
Setting 2 = medium speed
Setting 3 = high speed
Setting 4 = top speed
*The durations of the blending programs are preset :1 minutes each.
* You may individually adjust the times BLEND button together with the + and – buttons between 1
and 3 minutes.
* Press the ON/OFF button to enter programme.
* Once this was completed, you will hear 4 beeps.