Beyerdynamic Opus 800 Notice D'utilisation page 30

All manuals and user guides at all-guides.com
1.4.6 Mute
• If "VOL" is selected, it is displayed whether the receiver is muted or not.
• If you press the "Group" or "Scan" button you can activate or deactivate mute.
1.4.7 Name
• If "NAME" is selected a stored name is displayed or you can enter a new name.
• You can enter up to 6 characters (letters, numbers, + - * /, and space).
• Press the "Group" or "Scan" button and the first character will start flashing. (If the first
number is a space nothing will flash.)
• Press the "Group" or "Scan" button to select the desired character. Press the "Menu"
button to store the character. As soon as the character is stored the next character will start
flashing. Repeat these two steps until all 6 characters are stored.
1.4.8 Addressing / Control via PC
• If "REMO" is selected, the number of the PC-controlled receivers is displayed or can be
adjusted and the status of the PC control is displayed (ON or OFF).
• Connect the receiver with the supplied adapter and cable (supplied with the software) to
your PC. Up to 64 receiving modules can be controlled by PC simultaneously.
• To ensure a trouble-free control via PC, the receiving modules have to be addressed
differently. At the factory all receivers are set to the same address 64.
IMPORTANT:
Each module must have its own address. If two or more receivers have the same
address, errors will occur.
If the receiving modules are operated without a PC, it does not matter if two or more
receivers have the same address.
• When the receiver is PC-controlled "ON" and a number are displayed. This number is the
address of the receiver. When the receiver is operated without PC "OFF" and the address
of the receiver are displayed.
• If you want to adjust or change the address press the "Group" or "Scan" button. To store
the selected address press the "Menu" button.
31