Beyerdynamic Opus 800 Notice D'utilisation page 29

All manuals and user guides at all-guides.com
1.4.3 Group, Channel
• If "G/CH" is selected, the Group and Channel are shown on the display.
• Press the "Group" button once and the number above GROUP will start flashing. Push the
"Group" button now to change to another pre-programmed group. Press the "Menu"
button to confirm the selected group. The number above GROUP will stop flashing.
• Press the "Scan" button to select a channel automatically. The number above CHANNEL
will start flashing. Press the "Scan" button once again and the receiver will adjust an
interference-free channel automatically. Press the "Menu" button to confirm the selected
channel. The number above CHANNEL will stop flashing.
1.4.4 Frequency
• If "FREQ" is selected, the current frequency is displayed.
1.4.5 Squelch Level
• If "SQ" is selected, the current squelch level is displayed and can be changed.
• Press the "Group" or "Scan" button to select the desired squelch level within the range of
1 - 99.
• Press the "Menu" button to confirm the selected squelch level.
30