Regenerating The Activated Charcoal Filter - Gaggenau AR 410 710 Manuel D'installation

Regenerating the activated charcoal
filter
With normal use (daily for approx. 1 hour), the filters
must be regenerated every 3-4 months in order to
ensure that odors continue to be eliminated effectively.
Note: The activated charcoal filters can be regenerated
up to 30 times and must be replaced at least once every
10 years.
Note: With normal use (daily for approx. 1 hour), the
activated charcoal filters must be replaced at least every
10 years.
9
WARNING
Risk of burns
The activated charcoal filter remains hot for quite
some time after it has been regenerated. Do not
touch the activated charcoal filter straight after it
has been regenerated – allow it to cool down.
Leave the hot activated charcoal filter to cool
down on a heat-resistant surface.
NOTICE:
▯
The activated charcoal filters are fragile and heavy.
Always hold the activated charcoal filters with both
hands.
▯
The activated charcoal filter remains hot for quite
some time after it has been regenerated. Do not
place the activated charcoal filter directly onto an
easily damaged surface straight after it has been
regenerated – allow it to cool down sufficiently first.
▯
To regenerate the activated charcoal filter, place it
on a wire rack as baking trays may be scratched.
▯
Never clean activated charcoal filters with cleaning
products, water, in the dishwasher or with a damp
cloth.
▯
Do not regenerate activated charcoal filters using
the pyrolytic self-cleaning function or significantly
above 390° F (200 °C).
12
1 Undo the straight-knurled nuts on the two filter
covers.
2 Carefully remove the activated charcoal filter with
both hands.
NOTICE: The activated charcoal filter is heavy. Do
not drop it – this may cause parts of the filter to
break off.
3 Heat the activated charcoal filter in an oven heated
to 390° F (200 °C) for 120 minutes in air
recirculation mode.
4 Allow the activated charcoal filter to cool down.
5 Carefully insert the regenerated activated charcoal
filter with both hands.
6 Secure each activated charcoal filter in place with
three straight-knurled nuts.