Inspection & Maintenance - BH FITNESS YV16 Instructions De Montage Et Utilisation

Also securely tighten the holding bolts
between the column sections that
were previously left hand tightened.
Position trim covers (8) and (9) as
shown in Fig.3, use screws (29) to
hold them together and screws (30) to
attach them to the column.
Fit the hand straps (14) onto the
platform's outer rings (6) as shown in
Fig.4.
START-UP.-
1 Plug the mains cable (36) into the
socket (M) on the column, Fig.5.
The other end of the cable is plugged
into the electric wall socket (220V).
Set switch (L) to position (I), Fig.5.
INSPECTION & MAINTENANCE
Switch the unit off and unplug the
mains cable.
Use a damp cloth or towel to clean the
dust off the platform, especially the
handrails and the electronic console.
Do not use solvents.
All manuals and user guides at all-guides.com
ATTENTION:
Periodically check that all of the
fastening elements
tightened and connected correctly.
Check and tighten all the parts on
your unit every three months.
When in doubt about any parts on the
machine, do not hesitate to get in touch
with the Technical Assistance Service
by phoning customer services (see last
page in manual).
We recommend that your use original
spare parts to replace any worn
components. The use of other spare
parts may cause injuries or affect the
performance of the machine.
THE MANUFACTURER KEEPS THE
RIGHT TO MODIFY THE PRODUCT
SPECIFICATIONS
PREVIOUS ADVISE.
14
are duly
WITH NO