VS RondoLift Mode D'emploi page 9

(2)
(3)
(7)
(8)
(9)
3. Adjustments
Height adjustment
Height adjustment is performed with the flat button (1)
under the table top. The gas-filled strut triggered in this way
moves the table top upwards automatically or with a little
assistance (light lifting). The table top moves downwards
when it is pressed. The effort needed varies, depending on
the table-top size. The table top remains at the desired
height when the flat button is released.
Adjustment/readjustment of trigger mechanism.
If the gas-filled strut is not fully triggered when the flat
button (1) is pressed, it is possible to make a precision
adjustment by turning the flat button's adjusting screw (2).
The Bowden cable (3) is protected by a sheet metal cover.
Do not kink or jam the Bowden cable, above all when
folding the table top.
(1)
(1)
(4)
(1)
(7)
Locking.
In the case of RondoLift tables with rollers (8), they are each
equipped with 2 castors with brakes (4). These are essentially
those castors in the immediate vicinity of the flat button (1)
(user side). In the case of RondoLift tables with adjustable
glide elements (9), a fine adjustment can be made at these
elements for floor levelling.
Drawer.
Drawer (can only be selected with elliptical table). The drawer
(5) is lockable.
(1)
(7)
(5)
9