Installation And Connection; Remedy Of Faults - Pond Boss DIARSOL40 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Safe operation
• Only use original spare parts and accessories for the unit.
• In the case of electrical units and installations with a rated voltage of U > 12 V AC or U >30 V DC
located in the wa- ter: Isolate the units and installations (switch off and disconnect from the power
supply) before reaching into the wa- ter.
• Protect the unit from knocks or vibration.
• Clean the unit at least twice a year.
Installation and
connection
Do not submerge the unit!
Possible consequence: The unit will be destroyed.
Protective measures: Protect the air intake socket from the ingress of water.
How to proceed:
B
1. Connect the air hose to the aeration stone.
2. Fit the air hose to the float.
3. Place the float onto the water.

Remedy of faults

Malfunction
The unit does not deliver any air or the amount
delivered is insufficient.
Cleaning
Do not submerge the unit!
Possible consequence: The unit will be destroyed.
Protective measures: Protect the air intake socket from the ingress of water.
The unit has to be taken out of the water for cleaning or maintenance.
• Never use aggressive cleaning agents or chemical solutions. These could attack the housing surface
or impair the function.
• Recommended cleaning agent for removing stubborn limescale deposits:
– Vinegar- and chlorine-free household cleaning agent.
• Clean the solar module with a damp cloth and wipe dry.
Storage/Over-
wintering
Observe the permissible operating temperature range. (→ Technical data)
• If the limit values are exceeded or gone below, it is necessary to remove the unit. Clean the unit
thoroughly and check it for damage.
• Store the unit in a dry and frost-free place.
Disposal
Do not dispose of this unit with domestic waste! For disposal purposes, please use the return
system provided. Disable the unit beforehand by cutting off the cables.
PLEASE CALL 1-888-755-6750 BEFORE RETURNING TO THE STORE.
WWW.THEPONDBOSS.NET
Cause
The aeration stone is soiled.
Air hose kinked or porous
Air hose not correctly fitted
Insufficient sunlight
Remedy
Clean
Lay the air hose without kinks or replace.
Check the air hose.
Direct sunlight

Publicité

Table des Matières
loading

Table des Matières