SmartSun Toldo Classic Instructions De Montage page 26

EN
General notes on the manufacture of the awning
The fabric may have small imperfections, despite the sophisticated
production. These, however, do not diminish the quality of the fabrics in any
way. We would like to expressly draw your attention to the following
peculiarities of the manufacture of a tarpaulin:
• The folds may be created during fabrication and when folding the fabric
of the awning. In the course of this process, especially in the lighter colors,
surface defects can appear in the fold (pigment displacements), with
darker areas with a backlight (such as the ground strip). This does not
diminish the value or performance of the awning.
• Rainproof, acrylic and polyester sun protection: awning materials are
impregnated with water repellents and at a minimum incline of 14 degrees
can withstand light and weak rain. In case of heavy rain, the awning must
be removed to avoid damage. Awnings that are wet wrapped should be
extended again as soon as possible for drying.
• Imperfections in the weave of the fabric (like small knots in the thread that
compose it) do not diminish the performance of the canvas.
• Waves in the seam or stitches on the canvas are caused by fabric stress
(eg patterns, waffles or fishbone).
• The fabric thread does not have to be the same color as the part of the
fabric that contains the seam.