First Use; Cleaning And Maintenance; Boiling Water - Bourgini 23.0001.00.00 Mode D'emploi

EN
system will not work.
• Be careful with hot water and steam so as
to avoid burns.
• Only use the base that came with the
appliance.
• Never take the kettle off the base when
it is switched on.
• Only switch the appliance on once the
kettle is filled with sufficient tap water.
• Do not move the kettle when it is in use.
• Make sure the water level is always
between the minimum and maximum
markings on the water level indicator
before switching on the appliance. If
you exceed the maximum water level,
the kettle will boil over and hot water
could be forcefully sprayed over the
edge.

FIRST USE

• Clean the appliance and accessories.
See the section titled "Cleaning".
• Remove the kettle from the base.
• Fill the kettle with tap water to the
maximum marking on the water level
indicator.
• Boil the water. See the section titled

"Boiling water".

• Do not use the water you just boiled for
consumption or anything else. Allow it
to cool and then pour it down the drain.
BOILING WATER
• Always remove the appliance from the
base before filling it with tap water.
• Open the lid and check whether the
removable filter is properly placed.
• Fill the kettle with water until the water
level is somewhere between the
minimum and maximum markings on
the water level indicator.
• Close the lid and place the kettle on the
base.
All manuals and user guides at all-guides.com
• Switch the kettle on by turning the on/
• Once the water has boiled, the kettle
• Turn the on/off switch to position "O" to

CLEANING AND MAINTENANCE

• Unplug the appliance and wait for it to
• Never immerse the appliance in water
• Do not use any acerbic or abrasive
• Do not use sharp objects to clean the
• Check the appliance for possible
• Clean the exterior of the kettle with a
• Clean the removable filter with soapy
• Clean the base using a clean, dry cloth.
DESCALING
When to descale?
• The kettle needs to be descaled after
• Damage caused to the appliance
Descaler
• Only use a suitable descaler to descale
off switch to "I". The on/off indicator
light will illuminate. The appliance will
start to boil the water.
will automatically switch off and the on/
off indicator light will go out.
interrupt the boiling process.
cool down.
or any other liquid.
cleaning products to clean the
appliance.
appliance.
damage on a regular basis.
soft, moist cloth. Then dry it thoroughly
with a dry cloth.
water and then rinse it under running
water. Then dry it thoroughly with a dry
cloth.
every 25 uses.
through irregular descaling is not
covered by the warranty.
the kettle. This will be indicated
on the packaging of the descaler.
10