Assembling The Sliding Rack Kit - Ariston CX61SP6 T S Mode D'emploi

Assistance
! Never use the services of an unauthorised
technician.
Please have the following information to hand:
• The type of problem encountered.
• The appliance model (Mod.).
• The serial number (S/N).
The latter two pieces of information can be found on
the data plate located on the appliance.
All manuals and user guides at all-guides.com

Assembling the sliding rack kit

To assemble the sliding racks:
4. Finally, fit the frames on the spacers A.
! Do not place the sliding racks in position 5.
1. Remove the two
frames, lifting them
away from the spacers
A ( see figure ).
A
2. Choose which shelf
Left
Right guide
to use with the sliding
guide rail
rail
rack. Paying attention
to the direction in which
the sliding rack is to be
B
extracted, position joint
C
B and then joint C on
the frame.
3. Secure the two
frames with the guide
rails using the holes
provided on the oven
walls ( see diagram ).
The holes for the left
frame are situated at
D
the top, while the holes
for the right frame are
at the bottom.
GB
17