Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GRILL
• When using the GRILL cooking mode, place the
rack in position 5 and the dripping pan in position
1 to collect cooking residues (fat and/or grease).
When using the GRATIN cooking mode, place the
rack in position 2 or 3 and the dripping pan in
position 1 to collect cooking residues.
• We recommend that the power level is set to
maximum. The top heating element is regulated
by a thermostat and may not always operate
constantly.
PIZZA MODE
• Use a light aluminium pizza pan. Place it on the
rack provided.
For a crispy crust, do not use the dripping pan as
it prevents the crust from forming by extending
the total cooking time.
• If the pizza has a lot of toppings, we recommend
adding the mozzarella cheese on top of the pizza
halfway through the cooking process.
Planning cooking with the electronic
programmer
Setting the clock
After the appliance has been connected to the power
supply, or after a blackout, the display will automatically
reset to 0:00 and begin to blink. To set the time:
1. Press the COOKING TIME button
COOKING END TIME
simultaneously.
2. Within 4 seconds of having pressed these buttons, set
the exact time by pressing the
button advances the hours and the
the hours.
Once the time has been set, the programmer
automatically switches to manual mode.
Setting the timer
The timer enables a countdown to be set, when the time
has elapsed a buzzer sounds.
To set the timer proceed as follows:
1. press the TIMER button
.
2. Press the
and
buttons to set the desired time.
3. When the buttons are released the timer begins
counting down and the current time appears on the
display.
4. After the time has elapsed a buzzer will sound,
and this can be switched off by pressing any button
(except the
and
buttons). The symbol
switch off.
All manuals and user guides at all-guides.com
and the
and
buttons. The
button decreases
. The display shows:
will
! ! ! ! ! The timer does not switch the oven on or off.
Adjusting the volume of the buzzer
After selecting and confirming the clock settings, use the
button to adjust the volume of the alarm buzzer.
Setting the cooking time with a delayed start
First decide which cooking mode you wish to use and set
a suitable temperature using the SELECTOR and
THERMOSTAT knobs on the oven.
At this point it is possible to set the cooking time:
1. Press the COOKING TIME button
2. Within 4 seconds of having pressed this button, set the
desired amount of time by pressing the
If, for example, you wish to set a cooking time of 30
minutes, the display will show:
3. 4 seconds after the buttons are released, the
current time (for example 10.00) reappears on the
display with the symbol
and the letter A (AUTO).
Next the desired cooking end time must be set:
4. Press the END COOKING TIME button
5. Within 4 seconds of having pressed this button,
adjust the cooking end time by pressing the
buttons. If, for example, you want cooking to end
at 13.00, the display shows:
6. 4 seconds after the buttons are released, the
current time (for example 10.00) reappears on the
display with the letter A (AUTO).
At this point, the oven is programmed to switch on
automatically at 12:30 and switch off after 30
minutes, at 13.00.
Setting the cooking time with an immediate start
Follow the above procedure for setting the cooking time
(points 1-3).
! When the letter A appears, this indicates that both the
cooking time and the end cooking time have been
programmed in AUTO mode. To restore the oven to
manual operation, after each AUTO cooking mode press
the COOKING TIME
and END COOKING TIME
buttons simultaneously.
! The symbol
will remain lit, along with the oven, for
the entire duration of the cooking programme.
The set cooking duration can be displayed at any time by
pressing the COOKING TIME button
cooking end time may be displayed by pressing the END
COOKING TIME button
. When the cooking time has
elapsed a buzzer sounds. To stop it, press any button
apart from the
and
buttons.
GB
.
and
buttons.
.
and
, and the
13
Publicité
Table des Matières
