Connecting To The Tv - Samsung SEK-1000 Mode D'emploi

Connecting to the TV

To operate the TV using a Smart Touch Control, you must first
pair it to the TV via Bluetooth. Note that the Smart Touch Control
will only work with the paired Samsung TV. To pair the TV and the
Smart Touch Control for the first time, follow these steps:
1. When the TV is off, move within a few feet of the TV, point the
Smart Touch Control at the remote control receiver of the TV,
and then press the TV button.
The remote control receiver's location may vary
✎
depending on the model.
The TV button transmits an IR signal only.
✎
2. A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then attempt to connect to the
Smart Touch Control automatically.
When pairing is successful, the TV displays a small green circle between graphics representing the TV and the Smart
3.
Touch Control. If the Smart Touch Control does not pair, remove the Smart Touch Control's battery cover, aim the Smart
Touch Control at the TV's remote control receiver, and then use a pen tip to press and release the pairing button on the
back of the Smart Touch Control. In a few seconds, you should see the Bluetooth icon described in Step 2, and then the
Smart Touch Control should pair.
English-8