Connecting To A Wired Network - Samsung SEK-1000 Mode D'emploi

Correcting if Improperly Attached
Push one of the corners in the direction of arrow ① and press the
indicated by arrow ②.
Recovering a Previous State
1. Turn off the TV and detach the evolution kit from the TV. Unplug the TV's power cable before detaching the kit.
2. Turn on the TV, navigate to Software Update (Support > Software Update), and then update the software.
Update the software via the Internet. Otherwise, you will not be able to update via USB or play DRM-protected
✎
videos.

Connecting to a wired network

To use a wired network on a TV that has an Evolution
Kit attached, disconnect the LAN cable from the TV, and
then connect it to the Kit using the LAN Cable Adapter.
PUSH button
1
English-6
2
1
2