Manually Setting The Date/Time - Hama EWS-850 Mode D'emploi

Manually setting the date/time

Note – TIME mode
• Press the button (14) or the
flashing in the display.
Note – Time and time zone
• In TIME mode, press the mode button (16) repeatedly to toggle between the following
different displays:
• Time with seconds display, time with weekday display, time adjusted according to time
zone with weekday display, time adjusted according to time zone with seconds display,
date
• The time zone symbol (9) is displayed when the time has been adjusted according to
the the time zone.
• Press and hold the -button (14) for approx. 3 seconds to stop the search for the DCF
signal. The wireless symbol (8) goes out and you can set the time manually.
• In TIME mode, repeatedly press the mode button (16) until the time zone symbol (9) is no
longer displayed.
• Press and hold the mode button (16) for approx. 3 seconds to make the following settings
one after the other:
• Weekday (7)
• Year (5)
• Month (5)
• Day (5)
• D/M – M/D (5) display
• 12/24 hour format (5)
• Hours (5)
• Minutes (5)
• To select the individual values, press the -button (14) or the
each selection by pressing the mode button (16).
• If you do not make an entry for 2 minutes, you automatically exit the setup mode.
All manuals and user guides at all-guides.com
button (15) repeatedly until the symbol starts
-button (15) and confirm
9