Honda Power Products HHBE81BE Notice D'utilisation page 24

STARTING/STOPPING THE BLOWER (Fig. 6)
EN
◾ ◾
To start the blower, press down on the lock-off lever and hold it, then depress
the trigger. After a short delay the blower will begin to run.
◾ ◾
To stop the blower, release the trigger.
ADJUSTING THE AIR VELOCITY (Fig. 6)
6
Air Velocity Adjusting Knob
The blower is equipped with an incremental speed regulation to control air speed.
To increase the air velocity, turn the air velocity adjusting knob clockwise to the "rabbit"
position; To reduce the air velocity, turn the knob counterclockwise to the "tortoise"
position.
To enhance the air velocity, press the boost button to temporarily amplify the air
speed to the maximum.The blower will resume the previous speed when this button is
released.
24
EN
CORDLESS BLOWER — HHBE81BE
Boost Button
Lock-off Lever
Trigger