Honda Power Products HHBE81BE Notice D'utilisation page 19

ASSEMBLING THE BLOWER TUBE
WARNING: To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the tool when assembling parts.
1. Align either of the grooves in the
tube with the knob on the blower
housing. Push the tube onto the
blower housing until the knob
engages the grooves (Fig. 1 & 2).
2. Turn the tube in the direction of
the arrow until both of the knobs
slide into the lock positions
(Fig. 2 & 3).
1
2
3
CORDLESS BLOWER — HHBE81BE
Tube
Groove
Knob
Lock Position
19
EN
EN