If The Auger Stops Working - Omega ColdPress 365 MM400 Mode D'emploi

IF THE AUGER STOPS WORKING

1
2
Press the reverse button "
seconds, then release. When the reverse
button is released, the auger will stop
rotating. Repeat this 2 to 3 times.
The reverse button pushes the ingredients
upward releasing the food clog.
Press the slow "
to start. When using slow or fast the auger
should rotate. Wait 2 to 3 seconds. Then
press the reverse button "
Repeat this 2 to 3 times. Make sure the
auger stops completely after releasing
the button.
Note:
Even after following the directions
above, if the juicer still doesn't work,
please unplug the power cord,
disassemble the chamber set and
clean it. Then try again.
" for 3 to 5
" or fast " " button"
".
13