Hach TPM870 Manuel D'utilisation page 7

All manuals and user guides at all-guides.com
1.2.2 Setting up the hydraulics circuit
We recommend you to place the Hach 2100AN IS turbidimeter onto the
TPM870 and the Titration workstation or Ion Analyser on the left or right
side of these two instruments. The waste and rinse water containers can
be placed on the floor. Have in mind that around 150 ml of rinse water
are required per sample analysis. According to the number of samples to
analyse, it could be interesting to take the rinse water directly from an
ion exchanging column output.
Recommended position and space required
Titration
Workstation
or Ion
Analyser
The Sample Changer can be placed on the right or on the left of the
system defined above. Place the extension burette (ABU52 or ABU62)
beside the Titration workstation or Ion Analyser.
TPM870
Turbidimeter
TPM870
110 cm
7