Maintenance And Care - BASETech BTL-1 Notice D'emploi

All manuals and user guides at all-guides.com
- Set the selector switch to "REFRESH" after inser-
ting the accumulators into the charging set (see the
item "How to charge accumulators").
- The regeneration process starts, which is signalled
by the REFRESH LED being lit yellow.
- After the accumulator is reset the charging set will
be automatically switched off and the REFRESH
LED is extinguished. There is no automatic start of
the rapid charging procedure after the refreshing
operation.

Maintenance and care

Disconnect the charging set, the plug-in power supply
unit as well as the adapter from all power supplies
prior to any cleaning or maintenance. Only use a soft,
dry cleaning cloth to externally clean the set. Do by no
means use moisture or cleansing agents. Any mainte-
nance or repair should be solely performed by an
expert conversant with the relevant regulations (VDE
100, VDE 0701).
21