•
Fill the food to the beaker (not more than the maximum indicated
level).
•
Plug in, hold the power handle steady. Switch the appliance on by
pressing the switch button. (the marking of "I" is for the lower speed, "II"
for the higher speed.)
•
Immerse the blade guard completely in the ingredients.
•
Blend the ingredients by moving the appliance slowly up and down and
in circles.
•
After you have completed blending, Release the switch button, then
unplug from outlet.
•
Warning: The continuous operating time must be less than 10 seconds.
Never blend hot oil, fat or meat.
•
If your blender gets blocked, first stop and unplug before clearing.
•
After use, unplug and dismantle. The dismantlement is the reverse of
assembly.
•
Always switch off and unplug before cleaning. Please refer to the
instruction in the "care and cleaning".
To use the chopper
•
Remove the protective cover from the blade of the chopper.
•
Clean the lid, blade unit and bowl of the chopper.
•
Fix the blade unit in the chopper bowl.
•
Fill the food to the bowl (not more than the maximum indicated level).
•
Fit the power handle inside the chopper, turn and lock until you hear
a slight click. The marks on the power handle and the chopper should
now be aligned with each other. If this is the case, the chopper is
locked correctly.
•
Check if the power cord is not damaged.
•
Make sure your electricity supply is the same as the one shown on the
power handle.
•
Plug in, hold the power handle steady. Switch the appliance on by
pressing the switch button. (the marking of "I" is for the lower speed, "II"
for the higher speed.)
•
After you have completed blending, Release the switch button, then
unplug from outlet.
•
Warning: The continuous operating time must be less than 30 seconds.
•
If your chopper gets blocked, first stop and unplug before clearing.
•
After use, unplug and dismantle the power handle and the lid unit in
sequence, take the blade out of the bowl by holding the plastic shaft,
17