A‐ Installation of the Memory Card
There is no built‐in memory unit in the camera, so please insert a Micro SD card into
the slot before starting to use.
Important remark: Files can be transferred from the inserted card to a PC via a USB
cable; however, the reverse is not possible: files cannot be transferred from a PC to
this camera.
B‐ Charging the Battery
‐ A built‐in 750mAh rechargeable lithium‐ion battery powers the camera.
‐ Please ensure the battery is properly inserted inside the battery compartment, and
that the cover is firmly closed.
‐ To charge the battery, connect one end of the charging USB cable to the micro USB
port of the camera, and the other end the USB port of a PC.
IV – BEFORE STARTING
3. Gently insert the micro SD card into
the slot.
4. To extract the card, gently push in the
micro SD card, it will pop‐up
automatically for removal.
NOTE: It is recommended to use of a
high‐speed (Class 6 or Higher) memory
card for the best results in 1080 mode,
(Class 10 memory card for best results in
4K mode).
This camera supports memory cards up
to a 32GB capacity.
39